CALL 1-877-462-bolt  

FREE Shipping on Orders $1,000+

The Best CNC Workholding Method in Aerospace Manufacturing | Elijah Tooling

The Best CNC Workholding Method in Aerospace Manufacturing | Elijah Tooling

October 24, 2018

Today, I’ve got this interesting looking aerospace part. I thought I would go through and describe one of the key processes by which many of our fasters, you can see them connected to the back of this, are used. This is called Picture Framing.

Read More

How To Easily Quick-Change CNC Workholding Plates and Fixtures Using Invert-A-Bolt Fasteners and ZipBushings

How To Easily Quick-Change CNC Workholding Plates and Fixtures Using Invert-A-Bolt Fasteners and ZipBushings

October 17, 2018

This is a unique quick-change application. We made quick change plates for an old manual hydraulic press. But, you know what? You can make good use of quick-change in this situation as well. Check this out!

Read More

Review of the EZE-VISE™ Ultimate Vise (Modular Vise for CNC Workholding)

Review of the EZE-VISE™ Ultimate Vise (Modular Vise for CNC Workholding)

October 01, 2018

Today, I'm gonna talk about our EZEVise Ultimates, and you're probably already thinking, "dude he's got content on that already!" You're right. We do. However, we do not have a video describing all of the different features of this product, so I'm going to go through it with you.

Read More


Get a Free Modular Fixture Demo Kit for CNC Workholding!

Get a Free Modular Fixture Demo Kit for CNC Workholding!

September 12, 2018 1 Comment

We created a little plastic modular fixture that we can provide to you as a demo kit. It has all the basic elements of a full-sized modular fixture in it. This gives you the ability to actually test the fixture out and quick-change something yourselves!

Read More

Rick Explains The Different Invert-a-Bolt Fastener Accessories

Rick Explains The Different Invert-a-Bolt Fastener Accessories

August 08, 2018 1 Comment

Today we are going to talk about accessories and specifically the accessories for the hole that our workholding fasteners go into. 

So, this thing in my hand, the invert-a-bolt fastener, screws into a plate. The big thread goes into a plate and the smaller thread comes up into the piece that is being held. When we access this thread up and down, we can create a quick-change scenario

Read More

How You Can Get The Most Out of Your Flexvise Reversible Dovetail Vise

How You Can Get The Most Out of Your Flexvise Reversible Dovetail Vise

August 02, 2018

I've got a real simple thing to show you today but I feel like you're going to like it. We do have newer Vises, these are our old ones but, I wanted to show you that we have an addition to our vises now, we are going to add a dove tail to the front of this.

Read More


The T-Slot Fastener and the T-Slot Fixture CNC Workholding System

The T-Slot Fastener and the T-Slot Fixture CNC Workholding System

July 31, 2018

Today, I am going to introduce you guys to a new workholding system. What it does is that it combines a legacy component, which is the T-slot itself, and our, patent pending, holding and locating products.

Read More

How to Use The Zipbushing™ Precision Threaded Locator Bushing by Elijah Tooling

How to Use The Zipbushing™ Precision Threaded Locator Bushing by Elijah Tooling

July 12, 2018

Read More

SAVE Your CNC Workholding Fixtures and Tombstones From Being Scrapped

SAVE Your CNC Workholding Fixtures and Tombstones From Being Scrapped

July 10, 2018

We had customers telling us our Zipbushing™ were not only saving them time, they were also SAVING their fixtures and tombstones from being scrapped entirely because of the difficulty in removing the standard bushings/threaded inserts we knew we had a special product on our hands.

Read More


Another Way You Can Use The FlexVise™ Reversible Modular Dovetail Vise By Elijah Tooling

Another Way You Can Use The FlexVise™ Reversible Modular Dovetail Vise By Elijah Tooling

June 18, 2018 1 Comment

What we have here is we have got four FLEXVISE™ Reversible Modular Dovetail Vise holding this block. You can see that the block is bigger than what is typical for a dove tail vise. That is what is so cool about the FLEXVISE™ Reversible Modular Dovetail Vise; it can be driven from both sides and it has gripping from both sides of that pusher. 

Read More

How To Quick Change A Haas-TR210 Trunnion | CNC Workholding | Elijah Tooling

How To Quick Change A Haas-TR210 Trunnion | CNC Workholding | Elijah Tooling

May 24, 2018

I am standing in front of a TR 210 Trunnion and today, i would like to show you all something pretty exciting and that is quick-changing that thing. I know that if you have had some experience with this, it takes some time but, we are going to show you that this can happen in a very fast period of time and repeatably. 

Read More

The New & Improved Invert-a-Bolt Fastener

The New & Improved Invert-a-Bolt Fastener

March 20, 2018

I wanted to talk about our Invert-A-Bolt™ Fasteners today and show you how they work. One of our new Invert-A-Bolt™ Fasteners is a quarter turn device and it's very simple yet different. I wanted to show you guys exactly how it works so that there is no confusion when you are using it.

Read More