CALL 1-877-462-bolt 

Forget The Script. We Are Here To Help You Improve Your CNC Workholding Tooling

Forget The Script. We Are Here To Help You Improve Your CNC Workholding Tooling

March 31, 2019

Hey guy, it's Rick at Elijah Tooling.

Check it out. Here is my script for this video. Do you know what I think about that? ***Rips Paper*** Alright! what do I care?

I was supposed to tell you that we were supposed to ask you to subscribe. 

But, you know, I don't like reading from a script, and you may not either.

You know, there are people who constantly have their hand out. So, I am just gonna tell you. 

We are here to help you. We created these products so that your shop will be more productive, saving money, every day; cycle after cycle. 

So, if you would like to drop the script and try them out... Check them out.

That's all I got to say today, Man.

Thank you,

- Rick



Leave a comment

Comments will be approved before showing up.


Also in CNC Manufacturing Tips, Tricks, & How-Tos

This Is A Whole New Kind of CNC Workholding Fixture. It Combines Modular Fixture Technology w/ T-Slots.
This Is A Whole New Kind of CNC Workholding Fixture. It Combines Modular Fixture Technology w/ T-Slots.

March 31, 2019

I've got some exciting stuff to show you today. Today, we're gonna work on a whole different kind of fixture. This is a combination of our Modular Fixture, where you have Fasteners and ZipBushings incrementally. But, we've also added an element, which is our T-Slot Fasteners with the slots that accept the Xzerts Retractable Dowel Pins. So, I am gonna show you how we use that and I'm gonna kinda show you why we might use a riser or a different pattern at the same time.

Read More

How much force can be applied to the EZE Vise Ultimates? We just found out.
How much force can be applied to the EZE Vise Ultimates? We just found out.

March 30, 2019

We've got this vise set up, and I was asked today by a customer, "how much force does this EZE Vise Ultimate produce?" I thought to myself, this is the perfect opportunity to do a video. We will do it live...

Read More

How To Install Invert-A-Bolt Fasteners and ZipBushings
How To Install Invert-A-Bolt Fasteners and ZipBushings

March 06, 2019

Today we're going to go through the steps required to make the holes so that we can install these two common products that are used in our fixtures. So I've got a fixture that's in work right now. So you can see that this fixture has the hole for the Invert-a-bolt Fastener and the hole for the ZipBushing, and that is the most common type of hole that goes into our fixtures. We're going to show you all the steps.

Read More