CALL 1-877-462-bolt  

FREE Shipping on Orders $1,000+

Why mechanical & manufacture engineering should start using retractable dowels pins.

Why mechanical & manufacture engineering should start using retractable dowels pins.

December 18, 2019

Hey guys,

it's Rick at Elijah Tooling.

Hey for all you mechanical and manufacturing engineers out there, I want to talk to you about dowel pins.

Ah exciting touch subject.

Two minutes all right.

Okay, today we want to talk about our retractable dowel pin.

And the reality is: we talked about this thing in a lot of our videos, but I haven't talked about it specifically.

So first of all, one thing I want you to know is that it works with the ZipBushings™, so we can screw it in and out.

Of course, the ZipBushings™ is used for shoulder screws, dowels screws.

So, you can see I screwed it in and out of the ZipBushings™.

And that's one of the type of holes in this table over here.

But, we've got the dowel and it goes into the ZipBushings™ to the right!

So, dowel dowel.

What's the point? Why do you want to use this, versus this?

So, I'm going to come over here on the table and I can think of a couple of really good reasons to do this.

One: is that the Xzertz™. We call it as Xzertz™ retractable dowel pin.

You can adjust the height of it, to exactly what you want.

If you've got a dowel, it's a fixed length.

So, unless you got the right length.

So, if you've gone all over the shop looking for your dowel pin and this is now what you got.

So, let's just use this block for an example, you know we're going to load this block, we could do it like that and that's kind of, that's probably not the right way to do it.

But, if we manage it by this way, bring it down, we kind of find it, and then inevitably what happens is: with a long pin like that it gets bound up.

It's easy for a pin to bind, and then you can't get it out of there.

Can't get the part off.

So, I want to use the Xzertz™.

That's a little bit different because now all we got to do is slide our plate over.

Which by the way, is another advantage of this product: it's not sticking up.

Slide our plate over, pull the dowel up.

Oh, look at that! Located.

Now we just located one hole, but you’re going to locate two.

What we've got is a precisely made dowel pin, that has a thread on the bottom of it.

And this allows you to move the pin up and down, easily.

So, why buy this?

Let's go back to that again.

So, the cost between these two isn't that great, but this one is significantly easier to use.

Easier to manage, always in the plate.

So, that's another thing that's really cool about it, is because it can be flush mounted into the plate.

We can just leave it, in there. We don't have to go searching around for it.

And then lastly, depending on your situation you may be using vacuum we've got an o-ring around the outside, to hold a vacuum.

So next time you're thinking about dowel pins, consider this one.

All right.

See you, next time guys,

-Rick Miller

CEO & Founder of Elijah Tooling



Leave a comment

Comments will be approved before showing up.


Also in CNC Manufacturing Tips, Tricks, & How-Tos

Today's Machining World Interviews Elijah Tooling CEO Rick Miller
Today's Machining World Interviews Elijah Tooling CEO Rick Miller

January 13, 2020

On today’s podcast, we interview Rick Miller, owner, and co-founder of Elijah Tooling, a company that sells innovative CNC work holding equipment. Rick has a knack for coming up with unique products and has several patents in the work holding sector. He says that innovative ideas are vital for success but getting customers to buy into those ideas is what makes for a successful business.

Question: What tool would you like to see invented?

Read More

Quick-Change Demo For Vises and Trunnions
Quick-Change Demo For Vises and Trunnions

November 27, 2019

So what we're going to do, is we're going to load our vices, we're going to load a part, we're going to probe it in, we're going to cut it. And then, we're going to go to the next step; which is to load our trunnion, load it, load a part and start it up. What's the point? Well, we're trying to show you how fast you can load and unload your parts of course. And then, also how fast it is to bring the trunnion in, and precisely locate it; get it into place and start machining with it.

Read More

Three Reasons To Consider Using An Over-Sized Work-holding Tooling Plate
Three Reasons To Consider Using An Over-Sized Work-holding Tooling Plate

November 27, 2019

We've got three big features to consider a plate that's oversized. One: we get more travel out of our, or use of our travels. Two: ergonometrics, making it easier for the machine operator. And three: if we're using a fourth axis trunnion we're benefiting ourselves again from the travel standpoint.

Read More