CALL 1-877-462-bolt 

Another Way You Can Use The FlexVise™ Reversible Modular Dovetail Vise By Elijah Tooling

Another Way You Can Use The FlexVise™ Reversible Modular Dovetail Vise By Elijah Tooling

June 18, 2018

Hey guys, Rick here from Elijah Tooling.

I just wanted to talk to you today about what is going on in this machine right now. It has got to do with our FLEXVISE™ Reversible Modular Dovetail Vise product. I'm just going to shut this down and we will take a look at what is happening here.

Four Flex Vises

What we have here is we have got four FLEXVISE™ Reversible Modular Dovetail Vise holding this block. You can see that the block is bigger than what is typical for a dove tail vise. That is what is so cool about the FLEXVISE™ Reversible Modular Dovetail Vise; it can be driven from both sides and it has gripping from both sides of that pusher. 

I just thought that I would get this out there before our competitors start copying this particular feature. We are pretty excited about it.

Flex Vises holding Dove Tail Vise

As you can see, the FLEXVISE™ Reversible Modular Dovetail Vise at the front and the one at the back are gripping the part. These FLEXVISE™ Reversible Modular Dovetail Vise could be thirty inches apart or even a hundred inches apart and you can still dove tail the part 

We think this is a very cool feature. We are going to get into a more detailed, feature-packed video about the FLEXVISE™ Reversible Modular Dovetail Vise, but since we were kind of ending the day, I thought that it would be great to pass it on to you. 

Thank you for your time.

-Rick



Leave a comment

Comments will be approved before showing up.


Also in CNC Manufacturing Tips, Tricks, & How-Tos

Inquiries Regarding Quick-Change Plate for Trunnion
Inquiries Regarding Quick-Change Plate for Trunnion

June 12, 2019

Today we talk about the lowest cost solution for quick changing a trunnion without a quick change plate. We're going to look at a CAD model of how we can do this using two devices:  the patent-pending fastener and a locator that are used in T-slots. 

Read More

Forget The Script. We Are Here To Help You Improve Your CNC Workholding Tooling
Forget The Script. We Are Here To Help You Improve Your CNC Workholding Tooling

March 31, 2019

I was supposed to tell you that we were supposed to ask you to subscribe. But, you know, I don't like reading from a script, and you may not either. You know, there are people who constantly have their hand out. So, I am just gonna tell you. We are here to help you. We created these products so that your shop will be more productive, saving money, every day; cycle after cycle. 

Read More

This Is A Whole New Kind of CNC Workholding Fixture. It Combines Modular Fixture Technology w/ T-Slots.
This Is A Whole New Kind of CNC Workholding Fixture. It Combines Modular Fixture Technology w/ T-Slots.

March 31, 2019

I've got some exciting stuff to show you today. Today, we're gonna work on a whole different kind of fixture. This is a combination of our Modular Fixture, where you have Fasteners and ZipBushings incrementally. But, we've also added an element, which is our T-Slot Fasteners with the slots that accept the Xzerts Retractable Dowel Pins. So, I am gonna show you how we use that and I'm gonna kinda show you why we might use a riser or a different pattern at the same time.

Read More